[App_rpt-users] Migration Issues

David KE6UPI dshaw at ke6upi.com
Fri Jan 6 22:47:54 EST 2017

You can try to use the command "find".

find / -name ntp.conf    I don't think DIAL has NTP install by default.
Sorry I'm not a Debian user.

It looks like Debian uses ntpdate. You can edit /etc/default/ntpdate.


On Fri, Jan 6, 2017 at 7:09 PM, Jamey Wright <Jamey.Wright at morgan911.org>

> It says NTP is installed but there is no ntp.conf in /etc
> Jamey Wright - WR4JW
> ------------------------------
> *From:* shawpbx at gmail.com [shawpbx at gmail.com] on behalf of David KE6UPI [
> dshaw at ke6upi.com]
> *Sent:* Friday, January 06, 2017 7:30 PM
> *To:* Jamey Wright
> *Cc:* App_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Migration Issues
> Hello Jamey, If your time is off it might not connect to the ASL servers..
> If you have ntp installed you can edit the /etc/ntp.conf and make the
> changes there. If your using a DHCP make the changes to your DHCP server.
> David
> On Fri, Jan 6, 2017 at 10:54 AM, Jamey Wright <Jamey.Wright at morgan911.org>
> wrote:
>> I just migrated one of my nodes from ACID to DIAL.  It is up and running
>> fine but I have a couple of things that need to be addressed.
>> First, it is no longer showing up on the Allstar Status Pages.  When I
>> connected it to one of my other nodes the Allstar site showed the correct
>> info in the bubble display.  Is there a command I can run to force
>> registration or is there a logfile that might show errors?
>> Second, during the install I saw where it was trying to sync to time
>> servers.  I block access to time servers external to my network since I
>> have a Stratum 1 NTP server on my network.  Where can I change the NTP
>> settings?  I am not a Linux guru so a full path is appreciated.
>> Jamey Wright – WR4JW
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mai
>> lman/listinfo/app_rpt-users and scroll down to the bottom of the page.
>> Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170106/50b92857/attachment.html>

More information about the App_rpt-users mailing list