[App_rpt-users] Voter Lost Master Timing Source

Joe Moskalski kc2irv at gmail.com
Mon Jan 9 18:43:43 EST 2017


Weird, I have tested the Garmin 18 without issue setting it 9600 baud. I
don't use it because I run external antennas using the QRP Labs QLG-1. I
currently have my one RTCM for my second transmit site going over the
internet without an issue. You might be on to something with a possible
issue with that network switch.

On Mon, Jan 9, 2017 at 6:26 PM, Skyler F <electricity440 at gmail.com> wrote:

> We are using the Garmin GPS 18, and when we switch it to 9600 Baud, the
> GPS light never lights up, it needs to be on 4800 baud to actually get a
> GPS lock.
>
> It looks like it might have to do with the ethernet switch, tried
> connecting directly to the router, and no issues yet, i'll report back if
> it decides to randomly loose connection to LAN server again. Does anybody
> have experience with RTCM's on a network switch?
>
> On Mon, Jan 9, 2017 at 4:12 PM, Joe Moskalski <kc2irv at gmail.com> wrote:
>
>> It sounds like the RTCM is losing the connection with the GPS unit. If it
>> does, the host connection drops. I had this issue if I was using 4800 baud
>> for my NMEA data. I switched it 9600 and the issue went away.
>>
>> On Jan 9, 2017 6:01 PM, "Skyler F" <electricity440 at gmail.com> wrote:
>>
>>> With the RTCM and the Main server on the same LAN, and the RTCM pointing
>>> at the LAN IP of the server, 10 minutes or so, the RTCM looses the master
>>> server and then comes back, it gives offline and says the host connection
>>> was lost, then quickly goes back to OK.  Has anybody seen this before?
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170109/a097ee8d/attachment.html>


More information about the App_rpt-users mailing list