[App_rpt-users] Voter Lost Master Timing Source

Sam Skolfield kj6qfs at gmail.com
Mon Jan 9 19:18:05 EST 2017


Having rtcms on the same physical switch as the server is the *most* ideal
scenario you could possibly have. Should present less problems rather than
more.

Have you watched the RTCM's console during the drops to see if it mentions
anything about GPS Unlock? If not, does it present any other data of
interest when the server loses the RTCM?

Also, as I remember, the LVC18 needs to be configured with its windows
program for different baud rates, not sure if you're already doing that.

On Mon, Jan 9, 2017 at 3:34 PM Skyler F <electricity440 at gmail.com> wrote:

> We are using the Garmin GPS 18, and when we switch it to 9600 Baud, the
> GPS light never lights up, it needs to be on 4800 baud to actually get a
> GPS lock.
>
> It looks like it might have to do with the ethernet switch, tried
> connecting directly to the router, and no issues yet, i'll report back if
> it decides to randomly loose connection to LAN server again. Does anybody
> have experience with RTCM's on a network switch?
>
> On Mon, Jan 9, 2017 at 4:12 PM, Joe Moskalski <kc2irv at gmail.com> wrote:
>
> It sounds like the RTCM is losing the connection with the GPS unit. If it
> does, the host connection drops. I had this issue if I was using 4800 baud
> for my NMEA data. I switched it 9600 and the issue went away.
>
> On Jan 9, 2017 6:01 PM, "Skyler F" <electricity440 at gmail.com> wrote:
>
> With the RTCM and the Main server on the same LAN, and the RTCM pointing
> at the LAN IP of the server, 10 minutes or so, the RTCM looses the master
> server and then comes back, it gives offline and says the host connection
> was lost, then quickly goes back to OK.  Has anybody seen this before?
>
>
>
>
>
> _______________________________________________
>
>
> App_rpt-users mailing list
>
>
> App_rpt-users at ohnosec.org
>
>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
>
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
>
>
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at ohnosec.org
>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170110/89e75a0b/attachment.html>


More information about the App_rpt-users mailing list