waynehale at mac.com
Tue Jan 17 17:39:25 EST 2017
Also saw a similar problem on a Kenwood 2 meter repeater. Would decode
all DTMF except 3, A, B, C. Set deemphasis = no and solved the problem.
Trouble shoot by entering, from the command line, asterisk vvv -r Then
enter each digit one at a time and you should see each digit appear in
the Asterisk output. Type EXIT to exit the test mode.
On 1/17/2017 3:28 PM, Lawrence Roney wrote:
> I had this problem with a misconfigured deemphasis setting in
> simpleusb.conf. Typically, you uncomment the following line only if
> you are tapping audio from the radio’s discriminator output.
> ;deemphasis=yes ; enable de-emphasis (input “to the node’s usb
> dongle” from “radio’s” discriminator)
> Your audio levels could also be to low or too high.
> Lawrence – N6YFN
> *From:* app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Bruce B Isaacson
> *Sent:* Tuesday, January 17, 2017 2:07 PM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* [App_rpt-users] DTMF
> DTMF tones not being received to control node all else working.
> Would appreciate it if someone can head me in the right direction.
> 73s Bruce
> Scanned by Symantec Email Security.cloud service.
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users