[App_rpt-users] usbradio pre- & de-emphasis
kuggie at kuggie.com
Wed Jul 12 22:43:34 EDT 2017
On 7/12/2017 10:30 PM, Tim Sawyer wrote:
> In my estimation it's best to let the radio do the filtering whenever
> possible. It's not that app_rpt does anything bad, it does a perfectly
> find job. I just think the filtering and limiting in the radio will
> work and sound as intended by the manufacture. Of course there are
> always exceptions and extenuating circumstances... ymmv.
Here's my take. If you have radios [repeaters] (even ones of different
manufacture) that exhibit a frequency response equal or greater than the
bandwidth of the software, and let app_rpt do the signal processing,
then everything will sound identical. Personally, I could care less how
a manufacturer intends on how their repeaters should sound. I want
everything to sound the same. Allowing the application to do that very
thing makes a multiple repeater / multiple repeater manufacturer system
sound alike when channel hopping.
Disclaimer... I use a version of this application that has the
availability of wider then stock audio bandwidth for the local path.
More information about the App_rpt-users