[App_rpt-users] Kenwood TH-D7 Duplex Node?
Benjamin at Project23D.com
Sun Jul 23 15:07:25 EDT 2017
Unless you want to perform surgery on the radio, there is not an "easy"
way to bring "raw" audio out from the radio.
A possibility is just use the connections from the speaker mic ports. I
suggest using the BAL button to turn the volume off on the band you are
going to be transmitting on.
On Fri, 2017-07-21 at 22:11 -0400, Ramesh Dhami wrote:
> Hi All:
> Wonder if anyone is using a Kenwood TH-D7A (or may be an 'E') for a
> duplex node?
> The 'D7 could make for a good node, since it has the ability to operate
> in full duplex (RX on Band 'A' and TX on Band 'B'). I'd like to know if
> there is a way to bypass the internal TNC, or to bring out 9600 baud
> audio (or raw discrim audio) out somehow.
> I was initially using a pair of Baofeng's for a portable / full-duplex
> node... but the Baofeng's are as deaf as a potato!
> Ramesh, VA3UV
> #27919 and a truck load of others....
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
More information about the App_rpt-users