[App_rpt-users] RTCM Simulcast and 9.6 MHz Phase locking

Joe Leikhim rhyolite at leikhim.com
Sun May 7 03:42:25 EDT 2017


Thanks Joe;

I would certainly be interested in your documentation. Does this solve 
the problem of transmit PL tone jumping phase on key up, as Hayden 
encountered?

Joe L

On 5/7/2017 3:13 AM, Joe Moskalski wrote:
> I wanted to throw this email out to the group for all those who want 
> to simulcast with the RTCM. For those who don't know, in order to make 
> the RTCM suitable for simulcast you must have a more accurate 9.6 MHz 
> clock for the RTCM in order to ensure the audio sounds acceptable in 
> the overlap areas. I did this a few months ago using 9.6 MHz OCXO's. 
> This worked reasonably well. Not as well as I would have liked but the 
> system was very usable, but of course I wanted it to be better. Since 
> the PCGM (Programmable Clock Generation Module) is no longer 
> available, I decided to roll my own as some say.
> I created a PLL circuit that can accept a 10 MHz, 1 MHz or 100 KHz 
> reference input and produce a phase locked 9.6 MHz out for the RTCM. I 
> have been testing this over the past few days and it has made an great 
> improvement in the audio quality in the overlap. The quality of the 
> audio in the overlap areas sounds very, very good, it's very similar 
> to what I expect to hear in commercial simulcast systems. My circuit 
> is heavily based off of an old Motorola MSF5000 HSO PLL circuit that I 
> was able to adapt and modify to my needs.  There are other uses for 
> this circuit that make it attractive for simulcasting but I wont get 
> into them here. I am will to share my schematic and bill of materials 
> (digikey) with anyone. Please send me an email and I will be willing 
> to share all of my information on the project.
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> 
> 	Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> 
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
Joe Leikhim


Leikhim and Associates

Communications Consultants

Oviedo, Florida

JLeikhim at Leikhim.com

407-982-0446

WWW.LEIKHIM.COM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170507/460471e9/attachment.html>


More information about the App_rpt-users mailing list