[App_rpt-users] app_rpt issue with Polycom VVX phone

David Shaw shawpbx at gmail.com
Wed May 24 18:47:28 EDT 2017


looks like Benjamin could be right. Download this manual
http://support.polycom.com/global/documents/support/setup_maintenance/products/voice/spip_ssip_vvx_Admin_Guide_SIP_3_2_2_eng.pdf

Open the PDF and search for Voice activity detection

David



--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson

On Wed, May 24, 2017 at 3:37 PM, David Shaw <shawpbx at gmail.com> wrote:

> I attached the manual and it looks like Benjamin could be right.
>
> Open the PDF and search for Voice activity detection
>
> David
>
> ke6upi
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
> Thomas Jefferson
>
> On Wed, May 24, 2017 at 1:14 PM, Benjamin Naber <Benjamin at project23d.com>
> wrote:
>
>> Activity disconnect? Maybe the phone has VAD turned on, and if there is
>> not RX audio traffic, it thinks the line is hung and drops...
>>
>> Does the Polycom hang up when there is traffic?
>>
>> just guessing, haha
>>
>> ~Benjamin, KB9LFZ
>>
>>
>> On Wed, 2017-05-24 at 14:44 -0500, K Yoksh wrote:
>> > Hi everyone,
>> >
>> >
>> > I'm trying to help a friend troubleshoot an issue with his Polycom IP
>> > phones.
>> >
>> >
>> > He is trying to use a Polycom VVX500 to monitor his Allstar nodes, but
>> > the phone hangs itself up after 30 seconds.
>> >
>> >
>> > We've tried all sorts of things to cure the issue. It doesn't occur
>> > when using Cisco or Aastra phones, or any softphone we've tried. Just
>> > these Polycoms.
>> >
>> >
>> > Calls from phone to phone don't auto-disconnect either, this only
>> > happens when the phone is used to call *any* Allstar node.
>> >
>> >
>> > Any suggestions?
>> >
>> >
>> > Thanks. 73
>> >
>> >
>> > Kyle
>> > K0KN
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at lists.allstarlink.org
>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> >
>> > To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> > You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170524/757e1cb5/attachment.html>


More information about the App_rpt-users mailing list