[App_rpt-users] Speed Tests via command line

Loren Tedford lorentedford at gmail.com
Thu May 25 21:12:22 EDT 2017

Hello I just realized that the speed test script i use has been changed up
a little bit I figured I would post the new information on how to test your
speed test via command line..

Here is where i posted the article I hope this helps ya all out!

Hello recently their has been some changes to a program i use to test out
speed test related issues I decided to post the new information and code
here to help others..

First off I create a script:

Code: [Select]
nano speedtestsetup.sh
Inside speedtestsetup.sh I put the following information:
Code: [Select]
chmod a+rx speedtest.py
mv speedtest.py /usr/local/bin/
chown root:root /usr/local/bin/speedtest.py
To run the speed test I create another script called speedtest.sh
Code: [Select]
nano speedtest.shInside that script is the following information.
Code: [Select]
I hope this helps out some one else like it has helped me.. Good luck and
remember speed test is not everything you really should do a MTR report to
different points around the country to look for packet loss and other
issues that can occur..

Loren Tedford (KC9ZHV)
Email: lorentedford at gmail.com
Email: KC9ZHV at KC9ZHV.com
http://Ltcraft.net <http://ltcraft.net/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170525/a992de87/attachment.html>

More information about the App_rpt-users mailing list