[App_rpt-users] Temporary stop, then restart asterisk

Bob Pyke k6ecm1 at gmail.com
Fri May 26 11:40:09 EDT 2017


Since DIAL was on the RPi

Sent from my iPhone

> On May 26, 2017, at 8:37 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> No. It will be off for several minutes, but I want it to stop when commanded, and start on command. We are conducting an exercise. I don't know the version, and logging into the node does not say. We've been operating, pretty much since the introduction of app_rpt on the RPi 
> 
> Thanks
> 
> Sent from my iPhone
> 
>> On May 26, 2017, at 8:31 AM, Steve Zingman <szingman at msgstor.com> wrote:
>> 
>> Bob,
>> Are you talking about "bouncing" asterisk? A stop followed by a rapid start? Which distribution and version are you running?
>> 
>> 73, Steve N4IRS
>> 
>>> On 5/26/2017 11:28 AM, Bob Pyke wrote:
>>> I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.
>>> 
>>> Thanks,
>>> Bob
>>> Sent from my iPhone
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


More information about the App_rpt-users mailing list