[App_rpt-users] Temporary stop, then restart asterisk

Steve Mahler kizzy at lusfiber.net
Sun May 28 14:04:37 EDT 2017


Sure, make a macro that mutes telemetry ... cop 34 then enables or 
disables the repeater ...  cpo [23], set telemetry back to previous 
state ... cop 33 .  It works for me.

...STeve - KF5VH


On 5/28/2017 11:49 AM, Bob wrote:
>
> The cop,2 and cop,3 DTMF approach works quickly, which is what I need. 
> However, cop,2 reports "r p t e n a." Is there any way to quiet just 
> this response, and not the others, or perhaps substitute "status,2?"
>
> Thanks much all,
>
> Bob
>
> ------------------------------------------------------------------------
>
> *From:*App_rpt-users 
> [mailto:app_rpt-users-bounces at lists.allstarlink.org] *On Behalf Of 
> *Tim Sawyer
> *Sent:* Saturday, May 27, 2017 19:56 PM
> *To:* Users of Asterisk app_rpt
> *Subject:* Re: [App_rpt-users] Temporary stop, then restart asterisk
>
> What? That's a weird way to do it when you could just:
>
> 85 = cop,2
>
> 86 = cop,3
>
> Besides calling scripts when you don't have to is bad form and dangerous.
>
> On Fri, May 26, 2017 at 10:26 AM, Bryan D. Boyle <bdboyle at bdboyle.com 
> <mailto:bdboyle at bdboyle.com>> wrote:
>
> or...assign a couple DTMF functions in rpt.conf, for instance:
>
> 85 = cmd,/etc/asterisk/scripts/enable.sh
> 86 = cmd,/etc/asterisk/scripts/disable.sh
>
> where, in a /scripts directory under /etc/asterisk, there are two 
> scripts as above...
> enable.sh:
>
> #!/bin/bash
> /usr/sbin/asterisk -rx "rpt cmd nodenumber cop 2 nodenumber"
>
> disable.sh
> (replace the 2 with a 3)
>
> chmod 755 [enable.sh, disable.sh]
>
> rasterisk
> rpt reload
>
> lots of ways to skin the cat.  Remember, not only is asterisk/allstar 
> functionally rich...but you can also use the underlying OS to do many 
> wonderful and various things both to itself as well as the 
> application.  There are no limits to the creativity...
>
>
>
> On 5/26/2017 12:43 PM, Steve Zingman wrote:
>
> As you said, it was when DIAL first released for the RPi so it's 1.0
> From the asterisk CLI:
> rpt cmd 1999 cop 2 1999 <------------ system enable
> rpt cmd 1999 cop 3 1999 <------------ system disable
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org 
> <mailto:App_rpt-users at lists.allstarlink.org>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
>
>
> -- 
>
> --
>
> Tim
>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> 
> 	Virus-free. www.avg.com 
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> 
>
>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170528/47a3f20b/attachment-0001.html>


More information about the App_rpt-users mailing list