[App_rpt-users] RPi Memory Usage

Bob k6ecm1 at gmail.com
Mon Sep 4 12:03:09 EDT 2017


Thanks Jeremy for the pointer. I'd also like to understand what it is about
leaving some unpartitioned space that will help the longevity of an SD card.
It is my understanding the write cycles are a function of write cycles, not
space... been wrong before, and willing to learn something new.

Thanks,
Bob


-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Jeremy Utley
Sent: Monday, September 04, 2017 6:17 AM
To: 'Users of Asterisk app_rpt'
Subject: Re: [App_rpt-users] RPi Memory Usage

Sure it's possible.  Can't remember if it inclues the raspi-config tool, but
if not, you can run fdisk, change the partition size to use the entire sd
card, reboot, then run resize2fs.  However, this isn't always advised, as
leaving some unpartitioned space will help the longevity of a SD card.

Jeremy, NQ0M

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Bob
Sent: Sunday, September 3, 2017 9:17 PM
To: 'Users of Asterisk app_rpt' <app_rpt-users at lists.allstarlink.org>
Subject: [App_rpt-users] RPi Memory Usage

Is it possible to use the entire MicroSD memory space in the RPi load? It
appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize.

Thanks,
Bob

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 



More information about the App_rpt-users mailing list