[App_rpt-users] Registration Rejected.

Benjamin Naber Benjamin at Project23D.com
Mon Sep 18 18:19:03 EDT 2017


Limey is a great distro. my first node was using Limey. I like it as it
truely boots and then runs completely from RAM. Never had an issue with
power or any of this silly mess with RPi's.

The Limey Linux distro is still living on a 512MB Disk-on-module (flash
drive with laptop IDE instead of USB), and still runs. 

I went to DIAL as it appears Limey doesn't like the newer CM119 as used
in the RA-35. That, or the USB hardware on the Neoware CA22 is dying...

~Benjamin, KB9LFZ

On Mon, 2017-09-18 at 13:15 -0700, David Shaw wrote:
> Hello Benjamin, I'm running a very old copy of Limey Linux. Its a rock
> and keeps running. 
> 
> 
> The problem was, I made a change to the network router. Steve saw it
> wasn't reaching the ASL network. That was all I needed to look at my
> network.
> 
> 
> David
> 
> 
> 
> 
> 
> --
> Thanks, David
> 
> 
> 
> "Laws that forbid the carrying of arms...disarm only those who are
> neither inclined nor determined to commit crimes. Such laws make
> things worse for the assaulted and better for the assailants; they
> serve rather to encourage than prevent homicides, for an unarmed man
> may be attacked with greater confidence than an armed one."
> 
> Thomas Jefferson
> 
> 
> On Mon, Sep 18, 2017 at 12:16 PM, Benjamin Naber
> <Benjamin at project23d.com> wrote:
>         Can you still login to allstarlink.org?
>         
>         Are your node numbers still there? If so, are the Node
>         passwords your
>         node has, the same as the node passwords according to
>         allstarlink.org
>         web portal?
>         
>         unless there is something I'm missing, allstarlink.org does
>         not know
>         what "distribution" of ASL you are running, nor it is aware of
>         what
>         asterisk version you are running.
>         
>         ~Benjamin, KB9LFZ
>         
>         On Thu, 2017-09-14 at 11:05 -0700, David Shaw wrote:
>         > Well I'm lost. I feel rejected. 192.168.11.254 is my router.
>         > (Mikrotik)
>         >
>         >
>         > I be honest. I haven't had to login to the node for a long
>         time. Like
>         > a very long time. It's still running Limey Linux for crying
>         out loud.
>         > If this is a simple fix great. If not, I'll be changing over
>         to a
>         > RasPi 2or3 sometime next month.
>         >
>         >
>         > chan_iax2.c:6839 register_verify: No registration for peer
>         > '2064' (from 192.168.11.254)
>         > chan_iax2.c:6839 register_verify: No registration for peer
>         > '2063' (from 192.168.11.254)
>         > chan_iax2.c:6839 register_verify: No registration for peer
>         > '2064' (from 192.168.11.254)
>         > chan_iax2.c:6839 register_verify: No registration for peer
>         > '2063' (from 192.168.11.254)
>         > chan_iax2.c:9712 socket_process: Registration of '2064'
>         rejected:
>         > 'Registration Refused' from: '67.215.233.178'
>         > chan_iax2.c:9712 socket_process: Registration of '2063'
>         rejected:
>         > 'Registration Refused' from: '67.215.233.178'
>         >
>         >
>         >
>         >
>         >
>         >
>         > 2063 = radio at 127.0.0.1:4569/2063,NONE   ; This must be
>         changed to your
>         > node number
>         > 2064 = radio at 127.0.0.1:4569/2064,NONE,y
>         >
>         >
>         >
>         >
>         > bindport=4569
>         >
>         > register=2063:XXX946 at register.allstarlink.org
>         >
>         > register=2064:XXX615 at register.allstarlink.org
>         >
>         >
>         >
>         > --
>         > Thanks, David
>         >
>         >
>         >
>         > "Laws that forbid the carrying of arms...disarm only those
>         who are
>         > neither inclined nor determined to commit crimes. Such laws
>         make
>         > things worse for the assaulted and better for the
>         assailants; they
>         > serve rather to encourage than prevent homicides, for an
>         unarmed man
>         > may be attacked with greater confidence than an armed one."
>         >
>         > Thomas Jefferson
>         >
>         
>         > _______________________________________________
>         > App_rpt-users mailing list
>         > App_rpt-users at lists.allstarlink.org
>         >
>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>         >
>         > To unsubscribe from this list please visit
>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>         > You do not need a password to unsubscribe, you can do it via
>         email confirmation. If you have trouble unsubscribing, please
>         send a message to the list detailing the problem.
>         
>         
>         _______________________________________________
>         App_rpt-users mailing list
>         App_rpt-users at lists.allstarlink.org
>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>         
>         To unsubscribe from this list please visit
>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>         You do not need a password to unsubscribe, you can do it via
>         email confirmation. If you have trouble unsubscribing, please
>         send a message to the list detailing the problem. 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




More information about the App_rpt-users mailing list