[App_rpt-users] USB GPIO recommended circuit

Stephen - K1LNX k1lnx at k1lnx.net
Mon Sep 25 09:16:36 EDT 2017

I haven't used it yet, but I purchased one of these for that exact purpose:


It's a bi-directional shifter, which you've already thought of, so may or
may not help :)


On Thu, Sep 21, 2017 at 3:20 PM, Bryan Fields <Bryan at bryanfields.net> wrote:

> Is there a best practices for interfacing 5v TTL logic with the 3.3v logic
> on
> the GPIO pins?  I was thinking a bi-directional shifter would be good, but
> there are so many different ways to do this.
> Is there a best current practice for this?
> --
> Bryan Fields
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170925/02f6e827/attachment.html>

More information about the App_rpt-users mailing list