[App_rpt-users] ctcss Encode Issues

Michael "Lee" Lockwood michael at lockwood.us.com
Wed Sep 27 09:54:39 EDT 2017


I was doing some more thinking on the ctcss topic recently.  In addition to
my previous request of having the repeater tail/courtesy tone transmitted
using the same ctcss that it was originally received on, would it also be
possible to allow only certain ctcss tones to broadcast over the linked
nodes?  Whereas other ctcss tones in usbradio.conf would only key the local
repeater?

For example:

151.4 Only keys local repeater
71.9 Keys local repeater and linked node repeaters


On Fri, Aug 11, 2017 at 10:51 AM, Steve Zingman <szingman at msgstor.com>
wrote:

> It will be looked at. Work is happening on channel drivers now. (among a
> LOT of other things)
>
> Steve N4IRS
>
>
> On 8/11/2017 11:39 AM, Michael "Lee" Lockwood wrote:
>
> Understood, thanks Tom!  I hope this does get implemented, or finalized at
> some point.
>
> On Fri, Aug 11, 2017 at 10:36 AM, Tom Hayward <tom at tomh.us> wrote:
>
>> On Fri, Aug 11, 2017 at 8:28 AM, Michael "Lee" Lockwood
>> <michael at lockwood.us.com> wrote:
>> >
>> > Just to circle back on this topic...
>> >
>> > I tried itxctcss = as both 1 and 0 and no difference on this.
>> >
>> > If I'm understanding correctly, at this point app_rpt does only
>> transmit the "default" ctcss for the repeater tail and courtesy tone, by
>> design.  It does not transmit the other txctcss tones in the usbradio.conf
>> file.  I haven't misconfigured anything?
>>
>> If I were designing it, I would have done it this way, so I think that
>> yes it is acting as designed.
>>
>> However, since the itxctcss command exists, it should follow the
>> itxctcss command. It sounds like that piece was never implemented.
>> This is sort of halfway between a feature request and a bug report,
>> but I think it should be programmed so that when itxctcss == 1 it
>> operates as it does now, and when itxctcss == 0 it should operate as
>> you request, transmitting the input tone through the end of the
>> transmission.
>>
>> Tom KD7LXL
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
>
> *Michael "Lee" Lockwood*
> michael at lockwood.us.com
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 

*Michael "Lee" Lockwood*
michael at lockwood.us.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170927/a827d3a9/attachment.html>


More information about the App_rpt-users mailing list