[App_rpt-users] Remote base

Rachel Olivero rachel at olivero.us
Sat Dec 1 10:09:04 EST 2018


Kevin, 
 
I have a TM-D700 functioning as a remote base with a URI and a Pi 3. There are presently a couple of issues: 
 
 1. I had to set carrierfrom=no in simpleusb.conf in order to hear anything on repeaters after I unkey. Using usb didn't detect the presence of a carrier and pass audio until a new signal was detected. 
 2. When accessing the node with iaxrpt, I have to restart asterisk each time I disconnect. Otherwise no audio comes through. 
 
I can manually enter a frequency and control offset, tone, and power.  
 
Hope that helps. 
 
Rachel AD9O
On Fri, Nov 30, 2018, at 18:19, Kevin Babich wrote: 
> Greetings, 

>   

> Has anyone successfully integrated a Kenwood radio into Allstar with full Remote Base functionality (frequency, offset, etc.)? If so, can you please share which radio was integrated / interfacing / etc.? 

>   

> Kindest Regards, 

>   

> Kevin Babich | N9IAA 

> Valparaiso, IN 46383 

>   

> Mobile: 219.406.9707 

>   

> Cessna 421 

> Cesssna Conquest I/II 

> Beechcraft King Air 90/200 

>   

> “…It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...” -Theodore Roosevelt 

>   

> _______________________________________________ 
> App_rpt-users mailing list 
> App_rpt-users at lists.allstarlink.org 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>  
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" 
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
>  
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20181201/ff9d2fb2/attachment.html>


More information about the App_rpt-users mailing list