[App_rpt-users] Allstarlink newbie
mm at midnighteng.com
Tue Dec 4 18:06:50 EST 2018
I may not have a good answer for you but a answer.
It seems you are trying to 'roll your own' on a Pi.
I don't think I can help with those OS choices on a Pi. Unknown to me.
You are no doubt suffering from the lack of sound support in your system.
Same as our default image if you do not put a hold on the kernel headers
(yes we are using older versions of the kernel till a fix come for sound
I can only suggest you use the SD burnable image file located
and follow this guide
However, if you really want to keep pushing forward from where you are,
I suggest this read.
But the question is still out there if someone has got this to work on
your OS. So perhaps a better answer will come.
On 12/4/2018 7:21 AM, Marco Brunozzi wrote:
> Hi Mike, thanks for the answer.
> I started with install armbian on banana m2+ (Linux ir0uas_uhf
> 3.4.113-sun8i #68 SMP PREEMPT Wed Sep 19 10:23:30 CEST 2018 armv7l
> GNU/Linux), after that I had following this instruction:
> cd /tmp
> wget http://dvswitch.org/install-allstarlink-repository
> chmod +x install-allstarlink-repository
> If Raspbian: apt-get install raspberrypi-kernel-headers -y
> Otherwise: apt-get install linux-headers-`uname -r` -y
> apt-get update
> apt-get install allstarlink -y
> At the end of the installation process, I started the configuration
> with the help of startup script.
> Attached you can find the configuration files.
> 73 Marco IW0RED.
> On Mon, Dec 3, 2018 at 1:06 AM Mike <mm at midnighteng.com> wrote:
>> I can't make heads or tails of your log.
>> Perhaps just state what you want to have when done with your server,
>> what you have completed,
>> and what is not working.
>> Be sure to mention the hardware PC or Pi etc usb/radio ports etc.
>> Probably would not hurt to attach your rpt.conf file with your question
>> by the looks of the log.
>> On 12/2/2018 10:13 AM, Marco Brunozzi wrote:
>>> Hi everyone, I trying to setting up my first asl node. I don't have
>>> experiences in this years I had work with svxlink. The migration it's
>>> very hard. :-) Below the asterisk log.
>>> Thanks in advance.
>>> 73 Marco IW0RED.
>>> pbx_config.so => (Text Extension Configuration)
>>> == Registered file format ogg_vorbis, extension(s) ogg
>>> format_ogg_vorbis.so => (OGG/Vorbis audio)
>>> == Registered channel type 'rtpdir' (RTPDIR Ham Radio Bridging Driver)
>>> chan_rtpdir.so => (RTPDIR Ham Radio Bridging Thingy)
>>> Asterisk Ready.
>>> -- Loading initial config for repeater 28163
>>> [Dec 2 15:43:32] NOTICE: app_rpt.c:22184 rpt_master: Normal
>>> Repeater Init 28163
>>> -- Re-Loading config for repeater 28163
>>> -- rpt (Rx) initiating call to SimpleUSB/usb_28163 on SimpleUSB/usb_28163
>>> [Dec 2 15:43:32] WARNING: channel.c:3051 ast_request: No
>>> channel type registered for 'DAHDI'
>>> rpt:Sorry unable to obtain pseudo channel
>>> [Dec 2 15:43:32] NOTICE: chan_simpleusb.c:1534 hidthread:
>>> Assigned USB device 5-1:1.0 to simpleusb channel usb_28163
>>> == Set device 5-1:1.0 to usb_28163
>>> [Dec 2 15:43:32] WARNING: chan_simpleusb.c:1637 hidthread:
>>> Loaded parameters from simpleusb_tune_usb_28163.conf for device
>>> usb_28163 .
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users