[App_rpt-users] Allstarlink newbie

Marco Brunozzi marco.brunozzi at gmail.com
Wed Dec 5 10:42:35 EST 2018


Thanks, I'll make some test.
73 Marco IW0RED.
On Tue, Dec 4, 2018 at 7:07 PM Mike <mm at midnighteng.com> wrote:
>
> Well Marco,
>
> I may not have a good answer for you but a answer.
>
> It seems you are trying to 'roll your own' on a Pi.
>
> I don't think I can help with those OS choices on a Pi. Unknown to me.
>
> You are no doubt suffering from the lack of sound support in your system.
>
> Same as our default image if you do not put a hold on the kernel headers before updating.
>
> (yes we are using older versions of the kernel till a fix come for sound support)
>
>
> I can only suggest you use the SD burnable image file located
>
> http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/
>
> and follow this guide
>
> http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme
>
> However, if you really want to keep pushing forward from where you are, I suggest this read.
>
> http://enhanced.github.io/2018/08/ASL_With_ALSA
>
>
> But the question is still out there if someone has got this to work on your OS. So perhaps a better answer will come.
>
> ...mike/kb8jnm
>
>
> On 12/4/2018 7:21 AM, Marco Brunozzi wrote:
>
> Hi Mike, thanks for the answer.
> I started with install armbian on banana m2+ (Linux ir0uas_uhf
> 3.4.113-sun8i #68 SMP PREEMPT Wed Sep 19 10:23:30 CEST 2018 armv7l
> GNU/Linux), after that I had following this instruction:
>
> cd /tmp
> wget http://dvswitch.org/install-allstarlink-repository
>
> chmod +x install-allstarlink-repository
> ./install-allstarlink-repository
>
> If Raspbian: apt-get install raspberrypi-kernel-headers -y
>
> Otherwise: apt-get install linux-headers-`uname -r` -y
>
> apt-get update
> apt-get install allstarlink -y
>
> At the end of the installation process, I started the configuration
> with the help of startup script.
> Attached you can find the configuration files.
>
> 73 Marco IW0RED.
> On Mon, Dec 3, 2018 at 1:06 AM Mike <mm at midnighteng.com> wrote:
>
> Marco,
>
> I can't make heads or tails of your log.
>
> Perhaps just state what you want to have when done with your server,
>
> what you have completed,
>
> and what is not working.
>
> Be sure to mention the hardware PC or Pi etc usb/radio ports etc.
>
> Probably would not hurt to attach your rpt.conf file with your question
> by the looks of the log.
>
>
> ...mike/kb8jnm
>
>
> On 12/2/2018 10:13 AM, Marco Brunozzi wrote:
>
> Hi everyone, I trying to setting up my first asl node. I don't have
> experiences in this years I had work with svxlink. The migration it's
> very hard. :-) Below the asterisk log.
> Thanks in advance.
> 73 Marco IW0RED.
>
> pbx_config.so => (Text Extension Configuration)
>    == Registered file format ogg_vorbis, extension(s) ogg
> format_ogg_vorbis.so => (OGG/Vorbis audio)
>    == Registered channel type 'rtpdir' (RTPDIR Ham Radio Bridging Driver)
> chan_rtpdir.so => (RTPDIR Ham Radio Bridging Thingy)
> Asterisk Ready.
>      -- Loading initial config for repeater 28163
> [Dec  2 15:43:32] NOTICE[1223]: app_rpt.c:22184 rpt_master: Normal
> Repeater Init  28163
>      -- Re-Loading config for repeater 28163
>      -- rpt (Rx) initiating call to SimpleUSB/usb_28163 on SimpleUSB/usb_28163
> [Dec  2 15:43:32] WARNING[1227]: channel.c:3051 ast_request: No
> channel type registered for 'DAHDI'
> rpt:Sorry unable to obtain pseudo channel
> [Dec  2 15:43:32] NOTICE[1228]: chan_simpleusb.c:1534 hidthread:
> Assigned USB device 5-1:1.0 to simpleusb channel usb_28163
>    == Set device 5-1:1.0 to usb_28163
> [Dec  2 15:43:32] WARNING[1228]: chan_simpleusb.c:1637 hidthread:
> Loaded parameters from simpleusb_tune_usb_28163.conf for device
> usb_28163 .
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



-- 
Marco Brunozzi

Tel. +14152360004
Cel. +393483343274
Skype: marco.brunozzi
Twitter: marcobrunozzi
---------------------------------------


More information about the App_rpt-users mailing list