[App_rpt-users] Net Install Problem

nhardman1428 at gmail.com nhardman1428 at gmail.com
Sun Dec 9 19:10:41 EST 2018


The default username is: repeater  the password is: allstarlink  at the prompt type.  sudo asl-menu   This will load the menu which will guide you through the setup process of your node. 

Sent from my iPhone

> On Dec 9, 2018, at 12:14 PM, Mike <mm at midnighteng.com> wrote:
> 
> My first thoughts are to download again and start from scratch.
> 
> What are you using to image your usb drive ?
> 
> You seem to have only the OS installed.
> 
> When it did not fully install, i doubt you will have the user name pass expected since that is most likely preformed  in the asterisk install script?
> 
> Could be a boot/grub issue? Review/clean your bios settings.
> 
> I would try it all again and see if you get the same result as a minimum.
> 
> I have never installed from usb but a dvd. So just my thoughts.
> 
> ...mike/kb8jnm
> 
>> On 12/9/2018 11:43 AM, Gary Bonebrake wrote:
>> Greetings,
>> 
>> After several years of successful Asterisk repeater operation using Centos (node 27610), I have decided to move into the 21st century and update to Debian/Allstar/Asterisk. Sounded like a great project to attack over the holidays. I dug up an identical HP dc5100 PC, same as current repeater controller, for the new system. It has one CDROM drive and many USB ports.
>> 
>> The install .ISO file on the AllstarLink website is too big for a CD, so I created a bootable thumbdrive and forced my PC to boot from that. After the install completes and shuts down, I remove the thumbdrive and restart the PC. It comes up with the repeater prompt, but does not continue the installation of Asterisk. There exists no "asterisk.sh".
>> 
>> I would appreciate guidance on how to proceed.
>> 
>> BTW, the user "repeater" has no privileges and unknown password ("allstarlink" does not work).
>> 
>> Thanks
>> 
>> Gary W5BI
>> 
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20181209/89c220e9/attachment.html>


More information about the App_rpt-users mailing list