[App_rpt-users] connection failed

cnovey cnovey at gmail.com
Sat Dec 15 03:58:10 EST 2018


Nothing- no radio yet- just iax connections using PC soft and headset
No USB devices at all
iaxRpt software
will check iax.conf
thanks!!

-----Original Message-----
From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On Behalf
Of Mike
Sent: Friday, December 14, 2018 7:56 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] connection failed

What are you using for a URI ?

How many usb devices ?

What are you listening on iaxrpt, radio, other node ?

You might also check codec settings for corruption in iax.conf

...mike/kb8jnm

On 12/14/2018 10:50 PM, cnovey wrote:
> Haha!
> Ya man.
> I do have an image on my PC- I am prepared- but would only resort to 
> using it if really necessary. Learn more solving the issue as long as 
> the card is not corrupted.
>
> Issue now is stuttering audio really bad- even the telemetry coming 
> right off the Pi locally over ethernet to iaxRpt on PC is choppy. Pi3 
> is 1-3% CPU- plenty of RAM free etc. Trying to sort that out now.
>
> Thanks!
> Clifford
>
> -----Original Message-----
> From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On 
> Behalf Of Mike
> Sent: Friday, December 14, 2018 7:20 PM
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] connection failed
>
> Every app_rpt install comes with a free gremlin !
>
> Thought you knew that !
>
> However, once you have it working correct, why not image your SD card 
> and save it in the case it is going bad.
>
> ...mike/kb8jnm
>
> On 12/14/2018 10:15 PM, cnovey wrote:
>> So strange- ya I figured that out- just not sure how it got changed.
>> Thanks for the fast help folks!!
>> Clifford
>>
>> -----Original Message-----
>> From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On 
>> Behalf Of Bryan Fields
>> Sent: Friday, December 14, 2018 6:43 PM
>> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>> Subject: Re: [App_rpt-users] connection failed
>>
>> On 12/14/18 7:24 PM, cnovey wrote:
>>> Hi-
>>>       -- Executing [48654 at zoiper:9] Rpt("IAX2/kk6qms-8612",
>>> "48654|Pv)|KK6QMS") in new stack
>> You have the node password incorrect.
>>
>> [Dec 15 02:25:45] NOTICE[29658] chan_iax2.c: Host 23.241.113.252 
>> failed MD5 authentication for '48654'
>> (ff2759ceba964257d97305012973b84c !=
>> 1492cb51d65cc8e03b63ba866555b6ff)
>>
>> Get the password from the portal and make sure it's set in iax.conf 
>> with your register statement.
>>
>> 73's
>> --
>> Bryan Fields
>>
>> 727-409-1194 - Voice
>> http://bryanfields.net
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 



More information about the App_rpt-users mailing list