[App_rpt-users] allstar +irlp

Bob Pyke k6ecm1 at gmail.com
Mon Dec 31 11:02:53 EST 2018


The last time I helped an IRLP user setup his node, there came a point in the setup procedure where I had to provide the help desk access to the node (RPi with their software load), so they could install security codes required for it to work with the IRLP network.

Thanks,
Bob
K6ECM

Sent from iPad


> On Dec 30, 2018, at 11:35 PM, ea8ee <ea8ee1 at gmail.com> wrote:
> 
> It would not be an interconnection of systems but using irlp from the same node allstar I think it is necessary to buy the rights of use that my case already paid when I acquired my irlp node
> 
> ea8ee movil
> 
> El lun., 31 dic. 2018 0:04, Bryan D. Boyle <bdboyle at bdboyle.com> escribió:
>> last i checked, dave cameron (who has not open-sourced IRLP, since it is the basis for a commercial product he sells...) does NOT want allstar interconnected to his network, and deletes the registrations of any non-irlp gateways he becomes aware of.
>> 
>> He asked (demanded?) that Jim delete the code that enabled it back in ‘10 or ‘11, IIRC, so, unless things have changed on his side, it is not officially supported, and you are on your own (regardless of what other forked versions of allstar are doing).
>> 
>> If you want the official answer, I’d suggest you contact the owner of the IRLP code for his take on interconnecting IRLP to other linking networks.
>> 
>> --
>> Bryan
>> Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
>> 
>> 
>> 
>>> On Dec 30, 2018, at 18:43, Mike <mm at midnighteng.com> wrote:
>>> 
>>> There use to be some how-2's on the web.
>>> 
>>> I suggest you read all the IRLP rules before you do anything.
>>> 
>>> 
>>> 
>>> ...mike/kb8jnm
>>> 
>>> 
>>> 
>>>> On 12/30/2018 5:06 PM, ea8ee wrote:
>>>> I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
>>>> 
>>>> ea8ee movil
>>>> 
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20181231/075603ca/attachment.html>


More information about the App_rpt-users mailing list