[App_rpt-users] Remote already in this mode message

Bryan Taylor overnite at me.com
Thu Jan 4 10:53:34 EST 2018


In my case when Steve mentioned the crontab, I knew which node it was because that node is the only one I setup a crontab for.

I might have a different situation here, I have full control of every node that is connected on our little private network. If I can’t have full control of the node they don’t get connected. Most of the node owners are not computer or Linux literate, so someone needs to help them out. I have a couple other Linux guys with full access to all the nodes so it’s not a one man effort. So far it is working great, 11 repeaters linked and 3 more just about to come online.  We build the software for them here on the test bench and then they download the image file, put it in their pi and turn it on and the first comment is usually “the Audio is unreal!” Lol

Sent from my iPhone

> On Jan 4, 2018, at 12:12 PM, Phil Hebert <phil at n3cdy.com> wrote:
> 
> So how do you identify which end of the connection is causing it and is there a fix ?
> 
> Sent from my Mobile TRS-80
> 
> 
>> On Jan 4, 2018, at 10:40, Bryan Taylor <overnite at me.com> wrote:
>> 
>> Working correctly now, it was a remote node crontab error. Stupid mistake on my part lol
>> Thanks again
>> Bryan
>> 
>> Sent from my iPhone
>> 
>>> On Jan 4, 2018, at 12:07 PM, Kevin Custer <kuggie at kuggie.com> wrote:
>>> 
>>> That message can play if an auto-connect or Permalink is trying to establish (or re-establish) a connection.  The most common occurrence I've witnessed is when the network connection quality (Internet or otherwise) to/from the affected site becomes poor.  It confuses the system as to whether or not the node is actually connected and in an attempt to make sure, it tries or re-tries and then the message is played.
>>> 
>>> Kevin W3KKC
>>> 
>>> 
>>> 
>>>> On 1/4/2018 10:27 AM, Steve Zingman wrote:
>>>> Check for a cron task that tries to connect.
>>>> 
>>>> Steve
>>>> 
>>>>> On 1/4/2018 10:20 AM, Bryan Taylor wrote:
>>>>> I thought about doing that but I would like to find out why it started happening. Apparently it’s been doing it for a couple of days now, but I don’t know what could have caused it to start doing it.
>>>>> 
>>>>> Bryan
>>>>> 
>>>>> Sent from my iPhone
>>>>> 
>>>>> On Jan 4, 2018, at 11:47 AM, Lu V <luvencl8 at gmail.com> wrote:
>>>>> 
>>>>>> Just delete the one recording and or replace it with a low duration low volume beep. 
>>>>>> 
>>>>>> 
>>>>>>> On Jan 4, 2018 10:07 AM, "Bryan Taylor" <overnite at me.com> wrote:
>>>>>>> 
>>>>>>> Hopefully a quick question,
>>>>>>> 
>>>>>>> For a few days now I have one allstar node playing the “remote already in this mode” message about every  10 minutes. Anybody have any idea as to what could be causing it or where I could look to see what is causing it? It never did it before. I did add a new node to the network a few days ago but I did add the new node to it’s nodes stanza. It only connects to a hub node directly.
>>>>>>> 
>>>>>>> There is nothing in the log files that points to anything.
>>>>>>> 
>>>>>>> Google doesn’t find anything helpful either.
>>>>>>> 
>>>>>>> Thanks
>>>>>>> Bryan
>>>>>>> Sent from my iPhone
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180104/9eaa6118/attachment.html>


More information about the App_rpt-users mailing list