[App_rpt-users] RTCM Mix-station RSSI Indication

Tim Sawyer tisawyer at gmail.com
Thu Jan 11 19:05:56 EST 2018


Kevin,

Yes, I have separate vote and mix repeaters. If you'd like to see them
operate you could browse my Allmon.

There's a voter at: https://wd6awp.net/allmon/voter.php?node=2531
<https://wd6awp.net/allmon/voter.php?node=2531>A mix client at:
https://wd6awp.net/allmon/voter.php?node=2521
and at: https://wd6awp.net/allmon/voter.php?node=500 (this one is fairly
busy)

If those are not busy and you want to see some activity connect to me on
node 2530 and we'll talk.


On Wed, Jan 10, 2018 at 10:25 PM, Kevin Babich <kevin.babich at gmail.com>
wrote:

> Interesting... a bit more detail.
>
> The RTCM RSSI performs as expected with the same receiver if in a voter
> configuration. In mix, binary operation only. I failed previously to
> mention that the mix station is a disparate node, not part of the voter
> group node. The RTCM also interfaces with the CTCSS status line of the
> receiver.
>
> Tim, are you operating with a similar configuration for your mix node?
>
> As stated before, if the squelch is open, irrespective of SNR, only 255 is
> displayed. I’m thinking that if the discriminator has poor resolution, the
> squelch circuit wouldn’t function at all. Aside from RSSI indication,
> behavior is as expected.
>
> I wonder if there is a setting which causes this unintended result?
>
> Kevin J. Babich
>
> 219.406.9707 <(219)%20406-9707> Mobile
>
> ***Mobile EMail***
>
> Please excuse any typos and brevity.
>
> On Jan 10, 2018, at 10:50 PM, Sam Skolfield <kj6qfs at gmail.com> wrote:
>
> Woah, I've been missing out then! My mixminus  rig has never showed
> anything other than 0 or 255! Wonder what I'm missing...
>
> On Wed, Jan 10, 2018 at 8:08 PM Tim Sawyer <tisawyer at gmail.com> wrote:
>
>> It's true that RSSI is not relevant to the operation of mix mode. But the
>> RSSI reading should work exactly as it does for voted mode. The noise
>> squelch circuit is the same in either mode. With a near binary RSSI (as
>> Kevin described) I'd be concerned the discriminator audio has a poor noise
>> component or that something is wrong with the RTCM.
>>
>> I run both voted and mix RTCMs on different repeaters and the RSSI
>> behaves exactly the same on all.
>>
>> On Tue, Jan 9, 2018 at 10:52 PM, Chuck Henderson <rpt2 at chuck.
>> midlandsnetworking.com> wrote:
>>
>>> If it is in mix mode rather than voter mode then RSSI has no meaning.
>>> If the signal opens the squelch it will mix in with the best voted node.
>>> It is not intended to listen on the same frequency since it has no GPS
>>> timing to align the audio samples with the other nodes.
>>>
>>> On Tue, Jan 9, 2018 at 7:22 PM, Kevin Babich <kevin.babich at gmail.com>
>>> wrote:
>>>
>>>> Hello,
>>>>
>>>>
>>>>
>>>> I have an RTCM operational as a Mix-station in an environment with
>>>> other RTCM’s in voting configuration.  The Mix-station RSSI does not appear
>>>> to represent the actual signal level as a very binary 0 or 255 value is
>>>> displayed, irrespective of signal level.
>>>>
>>>>
>>>>
>>>> I understand a fix for this has been made.  As such, can someone please
>>>> direct me to the location which I might locate it?
>>>>
>>>>
>>>>
>>>> Best,
>>>>
>>>>
>>>>
>>>> KJB
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/
>>> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>> the page. Enter your email address and press the "Unsubscribe or edit
>>> options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>>
>>
>> --
>> Tim WD6AWP
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/
>> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
> --
> KJ6QFS
> Sam Skolfield
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180111/c9c75404/attachment.html>


More information about the App_rpt-users mailing list