[App_rpt-users] Pulse back adjustment parameter
luvencl8 at gmail.com
Sat Jan 13 01:48:52 EST 2018
Sent from my iPhone, Lu Vencl
> On Jan 12, 2018, at 12:22 PM, Jeff Carrier <k0jsc.jeff at gmail.com> wrote:
> Look for rxondelay in usbradio.conf that's what you need. It ignores COR for however long you specify. Can be used as a kerchunk filter too.
> de K0JSC
>> Message: 3
>> Date: Fri, 12 Jan 2018 07:39:12 -0500
>> From: Lu V <luvencl8 at gmail.com>
>> To: app_rpt-users at lists.allstarlink.org
>> Subject: [App_rpt-users] Pulse back adjustment parameter
>> Message-ID: <75544B9C-3453-4829-9143-652A119B9898 at gmail.com>
>> Content-Type: text/plain; charset=utf-8
>> I have never had to tweak this parameter yet but I do now as I am adding a repeater to my node via remote RF link. I don’t recall where this is performed. Can someone remind me which parameter and which file I need to tweak to remove pulse back or equivalent? What I’m referring to is where a COR is present upon push to talk release for a second. I need to compensate for a remote link that has a repeater tail timer of one second that I don’t want to have sent out to the network of connected repeaters.
>> Thanks in advance.
>> Sent from my iPhone, Lu Vencl
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users