[App_rpt-users] strangle garbling on second node

Pierre Martel petem001 at gmail.com
Mon Jan 22 09:14:55 EST 2018


think I Get it why this is going on..

all my usb port are on IRQ 3 AND my video adaptor

00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI
Controller
        Flags: bus master, medium devsel, latency 0, IRQ 3
        I/O ports at 1000
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI
Controller
        Flags: bus master, medium devsel, latency 0, IRQ 3
        I/O ports at 1020
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI
Controller
        Flags: bus master, medium devsel, latency 0, IRQ 3
        I/O ports at 1040
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI
Controller
        Flags: bus master, medium devsel, latency 0, IRQ 3
        I/O ports at 1060
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB2 EHCI
Controller
        Flags: bus master, medium devsel, latency 0, IRQ 3
        Memory at fdcf0000 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

01:02.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
ES1000 (rev 02) (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company ES1000
        Flags: bus master, stepping, medium devsel, latency 64, IRQ 3
        Memory at d8000000 (32-bit, prefetchable)
        I/O ports at 3000
        Memory at fdef0000 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2
        Kernel driver in use: radeon
        Kernel modules: radeonfb, radeon

So I am pretty sure this is the problem

Since I have an ILO2 card in it I will be able to mabe change this in the
bios remotely..




2018-01-21 18:43 GMT-05:00 Pierre Martel <petem001 at gmail.com>:

> I have my nodes 27821 and 28739, they use to run on an old P4.
>
> The nodes are on UsbRadio and the levels have been adjusted on with an
> IFR1500 so they are inline.
>
> I switched computer yesterday and now I use a Proliant G5P computer on
> Stretch.
>
> Got some help to make it run but all seem prety well. I also run
> chan_echolink with chan_usbradio.
>
> the drive is aN SSD, got 8 gig of ram and the cpu is an 8 core xeon at 2.2
> ghz.
>
> I also use the Raid controler to have a 1 TB raid 1 array.
>
> If I run the GUI ( Mate)  or only CLI ( init level 3) it still the same. I
> tested on the same usb bus or different usb bus and it make no difference
>
> here is the outpu of lsusb
>
>  lsusb
> Bus 005 Device 002: ID 03f0:1027 Hewlett-Packard Virtual keyboard and mouse
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 010: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio
> Controller
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 014: ID 0d8c:013a C-Media Electronics, Inc.
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> I use 2 URI. they are not modded fob.
>
> I switched usb cable.
>
> I used iaxrpt to connect to both repeater and I got that in the log of
> asterisk:
>
>  WARNING[9017]: chan_iax2.c:921 jb_warning_output: Resyncing the jb.
> last_delay -98, this delay 2918, threshold 1164, new offset -2918
>
> and we receive a lot of hungup message for only one short ptt:
>
>  -- Hungup 'DAHDI/pseudo-1302878576'
>     -- Hungup 'DAHDI/pseudo-1313783111'
>     -- Hungup 'DAHDI/pseudo-1265694909'
>     -- Hungup 'DAHDI/pseudo-1223961614'
>     -- Hungup 'DAHDI/pseudo-1745973833'
>     -- Hungup 'DAHDI/pseudo-311499195'
>     -- Hungup 'DAHDI/pseudo-1573868247'
>     -- Hungup 'DAHDI/pseudo-56935586'
>     -- Hungup 'DAHDI/pseudo-267958833'
>     -- Hungup 'DAHDI/pseudo-580580533'
>     -- Hungup 'DAHDI/pseudo-1976922523'
>
> Even with an echolink connection there are multiple Hungup 'DAHDI/pseudo
> messages in the log for only one tx.
>
> Anyone can help?
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180122/9e6c8c64/attachment.html>


More information about the App_rpt-users mailing list