[App_rpt-users] Short repeat of audio after unkey

Bryan Taylor overnite at me.com
Sat Jan 27 22:29:05 EST 2018


Hopefully a simple question, setup a new node today, full duplex repeater, with full duplex in simpleusb.conf set to 1, duplex set to 2 in rpt.conf. 50sec Hangtime and courtesy tone as well. 

When someone keys up and says 123, Then Unkeys he hears himself say  3.

Is this something fixable in software? Incorrect configuration maybe?
Thanks
Bryan
Vo1mxz


Sent from my iPhone

> On Jan 22, 2018, at 12:16 PM, Loren Tedford <loren at lorentedford.com> wrote:
> 
> Here  is what i get from my repeater site
> 
> root at rpt:~# dahdi_test -c 100
> Opened pseudo dahdi interface, measuring accuracy...
> 99.996% 99.997% 99.991% 99.997% 99.998% 99.995% 99.998% 99.989%
> 99.996% 99.995% 99.997% 99.996% 99.996% 99.998% 99.996% 99.999%
> 99.995% 99.996% 99.996% 99.993% 99.996% 99.996% 99.996% 99.999%
> 99.993% 99.997% 99.996% 99.996% 99.996% 99.996% 99.996% 99.996%
> 99.995% 99.995% 99.987% 100.000% 99.993% 99.996% 99.997% 99.990%
> 99.997% 99.995% 99.997% 99.997% 99.995% 99.998% 99.995% 99.996%
> 99.997% 99.995% 99.999% 99.994% 99.995% 99.999% 99.995% 99.996%
> 99.987% 99.996% 99.997% 99.995% 99.997% 99.995% 99.996% 99.997%
> 99.994% 99.997% 99.998% 99.994% 99.997% 99.998% 99.999% 99.992%
> 99.996% 99.998% 99.991% 99.997% 99.989% 99.996% 99.997% 99.996%
> 99.997% 99.988% 99.997% 99.998% 99.994% 99.998% 99.995% 99.997%
> 99.996% 99.996% 99.996% 99.995% 99.998% 99.996% 99.995% 99.996%
> 99.995% 99.997%
> --- Results after 98 passes ---
> Best: 100.000% -- Worst: 99.987% -- Average: 99.995637%
> Cummulative Accuracy (not per pass): 99.996
> root at rpt:~#
> 
> 
> Here is what I get from the Data Center  Hub.. Not yet aware of any issues but maybe i do have some thing going  on too..
> 
> root at uhf:~# dahdi_test -c 100
> Opened pseudo dahdi interface, measuring accuracy...
> 99.612% 99.607% 99.609% 99.612% 99.998% 99.994% 99.610% 99.607%
> 100.000% 99.158% 99.152% 99.999% 100.000% 99.998% 98.729% 98.730%
> 99.611% 99.608% 99.999% 99.994% 99.997% 99.996% 99.997% 100.000%
> 99.999% 99.608% 99.994% 99.614% 99.994% 99.999% 99.616% 99.609%
> 99.997% 99.993% 99.998% 99.998% 99.998% 99.617% 99.611% 99.611%
> 99.998% 99.607% 99.994% 99.991% 99.998% 99.998% 99.997% 99.994%
> 99.997% 99.615% 99.999% 99.607% 99.999% 99.997% 99.607% 99.994%
> 99.604% 99.998% 99.998% 99.995% 99.997% 99.996% 99.999% 99.998%
> 99.995% 99.992% 99.623% 99.609% 99.612% 99.611% 99.988% 99.628%
> 99.612% 99.615% 99.612% 99.616% 99.613% 99.999% 99.995% 99.998%
> 99.615% 99.612% 99.994% 100.000% 99.996% 98.104% 98.102% 99.999%
> 99.591% 99.605% 99.980% 99.999% 100.000% 99.996% 99.999% 99.996%
> 99.998% 99.998%
> --- Results after 98 passes ---
> Best: 100.000% -- Worst: 98.102% -- Average: 99.781178%
> Cummulative Accuracy (not per pass): 99.998
> root at uhf:~#
> 
> 
> I hope this helps.
> 
> 
> Loren
> 
> 
>> On 1/22/2018 7:36 AM, Pierre Martel wrote:
>> dahdi_test -c 100
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180127/7b44bdac/attachment.html>


More information about the App_rpt-users mailing list