[App_rpt-users] cw id with two nodes on server

ars.w5omr at gmail.com ars.w5omr at gmail.com
Tue Jan 30 13:25:25 EST 2018


I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.

You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.

73 = Best Regards
Geoff/W5OMR
(29655/56/57)
On Jan 30, 2018 04:18, Bryan Fields <bryan at bryanfields.net> wrote:
>
>
>
> On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems at mycns.net> wrote:
>
>> I am running 2 nodes    1994 and 1996 on this server with programed as below cw Id is good on mode 1996  not good on 1994 if I change the node number [morse1996] to [morse1994]  the problem reverses to the other node.Does this file need to be duplicated for both nodes?
>>
>> ; Morse code parameters, these are common to all repeaters.
>> ;
>> [morse1996]
>>
>> speed=20
>> frequency=800
>> amplitude=4096
>> idfrequency=750
>> idamplitude=1024
>
>
> How is your node configured?  You need to reference the Morse stanza in both node stanzas.
>
>
> 73
> --
> Bryan Fields
> M: +1-727-409-1194
>
>
>


More information about the App_rpt-users mailing list