[App_rpt-users] cw id with two nodes on server
k6ecm1 at gmail.com
Tue Jan 30 14:20:31 EST 2018
Same here. It seems to respond to the fist [Morse] stanza.
> On Jan 30, 2018, at 10:25 AM, ars.w5omr at gmail.com wrote:
> I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
> You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.
> 73 = Best Regards
>> On Jan 30, 2018 04:18, Bryan Fields <bryan at bryanfields.net> wrote:
>>> On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems at mycns.net> wrote:
>>> I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
>>> ; Morse code parameters, these are common to all repeaters.
>> How is your node configured? You need to reference the Morse stanza in both node stanzas.
>> Bryan Fields
>> M: +1-727-409-1194
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
More information about the App_rpt-users