[App_rpt-users] Allstar node Scheduler Help

Steve Thompson steve.n7tx at gmail.com
Fri Nov 9 22:39:02 EST 2018


hamvoip ... how do I check the cron?

Thanks 

> On Nov 9, 2018, at 13:22, Nate Hardman <nhardman1428 at gmail.com> wrote:
> 
> Which version of allstar are you running?  ASL v1.01  or Hamvoip ?  If your schedule is all commented out and something is still keying on the hour but not announcing the time, check the cron.  may have to be user root.
> 
>> On Fri, Nov 9, 2018 at 2:22 PM Steve Thompson <steve.n7tx at gmail.com> wrote:
>> I’ve recently created a new Allstar node, and I’m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there’s a CW message telling me it’s a timeout. Then the node unkeys. 
>> 
>> Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out.
>> 
>> I’ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf.  In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they’d not be running .. unless there’s something somewhere else triggering this behavior. 
>> 
>> Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly?
>> 
>> I have an extensive IT background but not much familiarity with Linux OS, so go easy on me. 
>> 
>> Steve N7TX 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> 
> -- 
> 
> Nathan Hardman
> nhardman1428 at gmail.com
> N8THN at ARRL.NET
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20181109/10e742c4/attachment.html>


More information about the App_rpt-users mailing list